Are you curious to see how the OnePlus 6T software runs on a daily basis? If you want to test the latest features that were added and the actual Android functionality, you can choose to install a ported version of the stock OnePlus 6T firmware right on your OnePlus 6. How is that possible? Well, thanks to xda senior member we can now use the latest OnePlus Android UI without worrying about software incompatibility problems or other similar Android glitches.
This ported version of the stock OnePlus 6T ROM can successfully run on the OnePlus 6 because both devices are sharing almost the same hardware and software architecture. Thus switching features, apps and even the actual Android functionality between these handsets can be done without too much hassle.
However, don’t look at this update opportunity as you would at a new OTA or official roll out. As already mentioned this is nothing but a third-party platform, a ported version of the OnePlus 6T firmware which was successfully compiled on the OnePlus 6. So, strictly refer to this update package as to another custom ROM alternative available for your device. Shortly, don’t associate the ported OnePlus 6T software with your OEM as it has nothing to do with official Android roll outs.
You are going to complete an unofficial flashing procedure and, most likely, your phone’s warranty will get void. Anyway, the warranty flag can be restored on your OnePlus 6 if you choose to bring your device back to its default state – that can be achieved easily, by choosing to reinstall the stock Android system on your handset.
An unlocked bootloader is required in this case. Thus, before doing anything else learn how to unlock the OnePlus 6 bootloader and only after doing that return to this step by step guide. As always, a new custom ROM cannot be set if the bootloader is running on the factory restrictions.
Backup your OnePlus 6 before starting to install the OnePlus 6T ported Android firmware. Do that as during the update operation a full wipe will be completed on your smartphone. Therefore, if you’re not careful enough you can end up in losing everything that’s important for you – basically, everything that wasn’t there from day one, including stuffs like contacts, call logs, texts, images, videos, audio files, market apps, internet settings, calendar info, saved passwords, EFS folder, IMEI / NVRAM data and similar other packages. On your handset you can of course already use the built in cloud storage platforms. Additionally, you can use an external storage device for making the backup, or you can just start syncing files with your Google Account. Another way in which you can perform this process is by downloading dedicated and already tested backup and restore apps from Google Play.
This is going to be a manual update procedure. Thus, a computer will be required and your phone and its USB cable must be near you too. On the computer that will be used you first have to set up the OnePlus 6 drivers and the Android SDK toolkit – you can learn how to install Android SDK on Windows by using this guide, or you can learn how to set up ADB on MAC OS X / Linux by using this tutorial instead.
On your phone you first have to access Developer Options – located under General Settings. If you don’t have developer options enabled, go to About Phone and tap repeatedly on Built Number until you receive the ‘you are a developer’ message (that should happen after 7 or 10 repeated taps). So, access Developer Options and from there select the USB Debugging feature.
Charge your device before resuming the next steps. As always, when complex operations are involved you have to be precautious. And since malfunctions can be caused if your phone gets turned off while you try to flash the new Android firmware, it is recommended to verify its power first. So, if the power left on your OnePlus 6 is currently lower than 50%, don’t go any further without plugging in the charger first.
Of course, do apply the steps that are explained in this tutorial only if you own the OnePlus 6 – as already outlined, the ported OnePlus 6T Android firmware will work only on the already mentioned smartphone so try not to mess things up.
How to Install the OnePlus 6T Stock Firmware on the OnePlus 6
- Download the ROM package from here and save the update file on desktop first.
- Unzip this file into a separate folder.
- Switch off your OnePlus 6 and wait while the power off process is completed.
- Access fastboot mode on your Android based device.
- Now, use your phone’s USB cable and connect your handset with your computer.
- Access the ROM folder from desktop and from there run the flasher_windows.bat executable file.
- Just follow on-screen prompts in order to resume the update operation.
- When everything’s done, close the cmd window, remove the USB cable and reboot your OnePlus 6 if that isn’t happening automatically.
- One more thing that must be done – on your smartphone flash the GMScore.apk file from the extracted ROM folder: just copy-paste this file on your phone and install it like any other normal APK and when done reboot your device for one last time.
- That’s it.
So, give it a try. Now you should be able to run the OnePlus 6T stock Android firmware on your own OnePlus 6. The software should run without issues as the update is fully stable, which means that you should be enjoying a smooth experience on a daily basis. Anyway, if you find something that isn’t performing as it should share it with us and with the other users who might want to follow this update tutorial – you can quickly get in touch with us by filling out the comments form from below. For more update opportunities available for your OnePlus 6 as well as for other tweaks and customizations don’t hesitate and search through our dedicated ‘how to’ page. Stay close and enjoy.