Using your Android device for completing different daily tasks might become really tricky as during time, your phone might get slowed down by the apps you install, by the Android OS and by other software related issues. Well, if you notice that your Motorola Moto Maxx isn’t performing as it used to, or if you notice bugs and other Android related problems, you should check and apply the guidelines from below in order to troubleshoot all these issues. Moreover, you can use this tutorial for unbricking your Moto Maxx, as I will show you how to restore your smartphone back to stock Android OS.

Usually the Android related problems, the so called software issues, are being caused by malicious programs, inappropriate apps and by other custom processes you might apply on your Moto Maxx. So, basically and most often, your Maxx might get bricked while you try to gain root access, install a custom recovery image, flash a custom ROM, apply a custom kernel, overclock the CPU, remove bloatware and so on. In order to make everything clear, these software related issues might refer to bugs, lags, screen freeze, alerts, errors, battery drain, heating issues, boot loops and also total blackouts.

All these are representing a particular case: the software brick. Luckily for you, if you soft bricked your Motorola Moto Maxx, now you can easily learn how to manually unbrick your Android device. Of course, you can also hardware damage your handset, but in that situation you have to take your phone back to service – note that if you can’t reclaim the warranty of your device, you will probably have to pay for the technical assistance and it can get quite expensive.

Good; as already pointed out during the introduction from below, you can also use this step by step guide for downgrading your Motorola Moto Maxx to stock Android OS. Restoring your Moto Maxx back to stock firmware is extremely useful as this operation can be used in the following situations: you want to revoke root access, you want to reinstall all factory and default restrictions back, you are currently running on a buggy custom ROM and want to go back to stock software.

The best is that the troubleshoot solutions from below can be applied on both rooted and locked Moto Maxx and whether your phone is installed with stock Android OS or with a custom ROM. As mentioned, after dealing with the guidelines from below, root access will be revoked (only if you had ensured root previously) and your phone restored back to its initial state.

Because of that, if possible, before starting the troubleshoot methods you should backup your Motorola Moto Maxx. Else, you will lose everything that’s saved on the internal storage memory of your device. Thus, use backup and restore apps and other similar tools, such as cloud storage platforms or a computer, and save your contacts list, call logs, text messages, internet settings, market apps, images, videos, audio files and everything else you might need afterwards.

As you will see during the steps from below, a computer will be required. The flash tool will be downloaded and installed on your PC. Moreover, your phone and its USB cable will have to be near you. Now, on your computer check if there are security tools installed, because you should temporarily deactivate the antivirus-like programs. Then, on your phone navigate towards “menu – settings – developer options” and enable USB debugging option. Don’t forget to plug in the charger before doing anything else – if your Moto Maxx will get turned off while you will try to downgrade it back to stock Android OS, or while you will try to revoke root access, you will mess things up even more.

The operations from below are all official. By completing these procedures you will not lose the warranty of your Motorola Moto Maxx. Moreover, you can actually fix various software related issues and you can also unroot your Android powered device. Anyway, do note that this tutorial is compatible only with the Motorola Moto Maxx and it shouldn’t be applied in any other situation.

How to Easily Unbrick Motorola Moto Maxx

The easiest way in which you can address Android software related issues is by making a hard reset and by clearing cache from recovery mode. By completing this operation you can speed up your Motorola Moto Maxx and you can get rid of malicious apps. Of course, if this process isn’t quite useful for you, then you shouldn’t hesitate in choosing to downgrade your smartphone back to stock Android firmware.

Do note that while you will complete the hard reset operation, all of your personal data, info and accounts will be wiped out. Thus, don’t forget to make a proper backup operation first in order to avoid unpleasant situations from happening.

Here is how you can hard reset your Moto Maxx:

  1. Turn off your phone – initiate a proper shut down sequence: press power button and select “power off” or press and hold power key for a few seconds.
  2. Then, enter recovery mode on your Android device.
  3. From recovery you have to select “wipe data factory reset” – agree with the alert if prompted and wait while the hard reset process is being completed.
  4. Then, go back to main menu of recovery and from there choose “wipe cache partition” and “wipe dalivk cache”.
  5. When done, from main menu of recovery pick “reboot system now”.

Install stock Android OS and Unroot your Motorola Moto Maxx

  1. On your computer from this page download the stock Android firmware for your Motorola Moto Maxx.
  2. Then, go here and download RSD Lite program.
  3. Unzip RSD Lite and then install the program on desktop by following on screen prompts.
  4. Turn off your smartphone.
  5. Press and hold Volume Up and Power buttons at the same time until your reach fastboot mode on your Moto Maxx.
  6. Connect your smartphone with your computer by plugging in the USB cord.
  7. From desktop run RSD Lite.
  8. Then, from the program click on the “…” icon and then pick the firmware file from desktop.
  9. When done, select “Uncompress” and just start the flashing process.
  10. Wait while the installation process is completed.
  11. In the end, unplug the USB cable and reboot your smartphone.

Well, that was all. So, these are the easiest ways in which you can try to unbrick your Motorola Moto Maxx. Also, now you know how to downgrade your Android device back to stock Android OS and how to revoke root access. So, how things worked for you? Do share your experience with us by using the comments field from below.

corner-left-up dots-three-vertical